sale
Seagull Edge 540 EP 1.1 Metre

 

bundle

 

£

 

 

Quantity: 

Who doesn't like an Edge? Arguably one the best looking full size aerobatic aircraft around, Seagulls Electric Edge 540 has all the purposeful yet elegant lines of the original. Just one look at the oversize control surfaces tells you this one will have a sparkling performance - and you would be right! From outrageous 3D manoeuvres, through to graceful airshow aerobatics and aggressive snaps this one takes them all in its stride, yet floats in for the gentlest of landings with no nasty tip stalling behaviour like you will find on similar models.
As you would expect from Seagull the model is beautifully constructed, and unlike many other ARTF's is covered in genuine Oracover, regarded the world over as the best covering film available, which not only makes for a durable model but makes repairs a lot easier should these ever be required. Constructed from Balsa and Ply with a superb GRP cowling all the building work is done for you! The design means the model is so light you will be amazed! This one can easily be built in a couple of leisurely evenings (or less).
This is a really gorgeous model that will be the pride of any hanger and introduces a new benchmark in the value stakes.

Please note this model requires 5 servos. One is required for each elevator half and we recommend 2 servos around the 6 gram mark for each elevator half. (see bundle deals below).

Wing Span
Wing Area
Length
Approx flying weight
42.7ins. (108.5cm)
376.7sq.ins (24.3sq.dm)
Length - 38.8ins (98.6cm)
2.4-2.9lbs (1100-1300g)
Servos Required
Suits Battery
Motor Required
5 x 9g or 3 x9g, 2 x6g Micro
1800 to 3000 Lipo 3 cell
Airtek 3536/1410/6T or similar

 

bundle deal

switch

Edge 540
Motor & ESC Bundle
DEAL7
A great value Kit/Motor/ESC combination to get the best out of the Edge 540.
Includes the Edge 540 kit as above, plus an Airtek 3536-1410-6T Motor and a matching Airtek ECO 40amp ESC.

Terrific value!

 

£
Quantity
switch

Edge 540
Motor, ESC and Servos Bundle
DEAL10
As above PLUS 3 x Airtek Airtek 9g SAK/9HT High Torque Servos, and 2 x PowerHD 6g Servos (for each elevator - the Edge requires 5 servos).

 

£
Quantity


Please note: As the Edge 540 uses 5 servos we recommend considering the use of a UBEC, particularly if using digital servos. The HiModel 3A, 5-6v Switch Mode UBEC, which you can find here is the perfect partner, and you have the added advantage that you can run your servos at 6v if desired for even greater speed and torque.
If you require any other deal combination that is not listed above, please e-mail us and we will work out a price!
pdf To download a PDF of the instruction manual please click here
IMPORTANT NOTE REGARDING CARRIAGE ON KITS AND BUNDLES:
Due to the size of kits these are all sent by carrier (requires signature). If you require your order to be sent to another address (e.g. work) please complete the delivery address details on checkout.