JP Mosfet Pulse IC Power Panel
FE1
Is your present power panel looking a bit tired? Loose connectors leading to frustration when trying to start your engine? Then it's time you treated your field box to a new power panel!
Take a look at the spec on this, terrific value!
JP Micro-Pro Power Panel
FE2
For those that prefer a smaller flight box, or use a separate pump, this micro power panel is just the job - it even charges your glowclip!
Again a quality power panel which represents outstanding value.
Long Lock on Steel Glow Clip
Long Reach Corded
FE10
A versatile glow clip for your field box power panel, with positive locking action and extra long reach for those deep in cowl installations.
Long Glow Start Clip with 2400 mAh capacity NiMh and mains charger.
FE21
With its generous capacity battery and supplied mains wall charger this is all you need for a days worth of engine starts. Long probe can reach the deepest of buried plugs.
A 'must have' and such good value!
JP Glow Starter AA Size
75mm-Shaft (Metal))
FE8
A really handy glowstart which takes standard 'AA' batteries.
Extra long strong metal shaft for those hard to reach in-cowl plugs.
JP Micro Glo-Start 1800mah (NiMH)
FE9
Every power pilot should have one of these handy little glow starts in their pocket!
Saves walking back to the pits when you open the throttle and your motor splutters and dies!
Includes 1800 mah NiMH.
Overlander Model Stand
FE22
A fantastic model stand for use both in the workshop and in the field. Made from a super tough blue EVA foam this versatile stand will make your models much easier to work on. Once you have used one you will wonder how you ever did without it!
Size: 85 x 300 x 400mm.
PLEASE NOTE: due to it's size this item will normally be sent standard parcel post.
Remote Glow Lead
FE15
Remote glow assembly for aircraft, helicopters & cars. Use this whenever you need super-convenient and safe starting.
The dummy glowplug is attached to a convenient point on your models exterior.
Snap on Spring Loaded Glow Plug Lead/Connector with Rubber Hood
FE9
Simply pull the wire against the spring, place over the plug post and release for a super tight plug connection.
For making up your own remote glow connections.
Fingerguard
FE12
Still starting your I.C. engine by hand? Then you NEED one of these. Tough thick walled rubber finger guard prevents cuts and bruises from the prop.
Don't take the risk, protect your fingers with one of these!
JP Powertorque II 12v Engine Starter
FE3
An engine starter is one of those 'once only' investments, so buy wisely.
We think this is one of the best starters available - robust, reliable and an excellent choice for all serious modellers.
EZ Starter geared for large glow and petrol engines
FE19
A geared starter from Anderson Racing for large glow and petrol engines.
This starter produces a massive torque of 24kg/cm2 for handling those large motors.
JP Starter Cone Rubber Insert
FE7
A spare starter cone rubber insert, fits the JP Powertorque starter and most other brands.
Valvespout Bottle 200cc
FE20
The classic valvespout fuel bottle used by generations of modellers and still as handy today as it ever was. A simple twist of the brass spout either seals or opens the bottle. Great as a 'squeeze' filler for small tanks or as a priming bottle.
An 'essential' for any I.C. flyers field box.
6oz Fuel Primer Bottle
FE13
A handy fuel primer with a generous 6oz capacity, can also be used for filling the smaller fuel tank as well.
Save spillage while trying to prime down the carb with your pump - use a primer bottle!
Recoil Fuel Tubing for Tank Filling
FE11
A neat way to fuel your model, this handy recoil fuel tubing stretches to your model when needed then recoils back to a compact size when out of use.
Ideal for use with the pump below.
JP Deluxe Hand Glow Fuel Pump
FE6
A deluxe hand-crank fuel pump for use with model glow fuels.
Super smooth mechanism for fast fill and drain.
Designed for easy flight box mounting.
Very reliable!
JP Deluxe Electric Glow Fuel Pump
6 - 12 volt operation.
FE16
A super quality, very reliable electric fuel pump that can be mounted anywhere on the field box, or used as a stand alone unit. Ideal for use with our recoil fuel tubing.
JP Supertacho Mini Tachometer
FE4
A really great investment for all model flyers, power, electric and helicopter.
A tough tacho capable of reading 2 or 3 blades within 100-29,000 RPM.
A great investment for all flyers, takes away the guesswork.
JP Microtacho Micro Tachometer
(Pocket Size)
FE5
A really neat little tacho with all the features of the Mini, but in a pocket size!
If you don't have a tacho this is a 'must have' at a price that won't break the bank!
Four Way Multi Purpose Wrench
FE18
If you have only one tool in your field box make it one of these. A very versatile wrench that can be used on glowplugs as well of the majority of the most commom prop driver nuts. Absolutely essential for the power flier. Chrome plated steel for 8, 9, 10 and 12mm sockets.
'T' Handle Glow Plug Wrench
FE17
Extra long shaft Glow Plug 'T' Wrench will reach those deeply buried glowplugs. Easy torque tommy bar removes even the most stubborn plugs. A quality item made from chrome vanadium steel - one of those essential purchases which should last a modelling lifetime.
Mini Adjustable Spanner 100mm
TO8
So useful for both the workshop and field this is another modellers 'essential'. This one is chrome plated so won't rust and is 4inch (100mm) in length.
Keep one of these in your field box at all times!