tx R/C Systems Tx Rx etc kit Kits and ARTF servo Servos mot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc eng I.C. Engines plug I.C. Engine Accessories starter Field Equipment prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc spinner Lighting and Sound Systems spinner Simulators balsa Building Materials - Balsa etc cover Covering Materials brush Brushes brush Pilot Figures band Velcro, Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc giftGift Vouchers
Seagull EP E-Pioneer Trainer 1.6m








Electric flight really has come of age! Here we have a trainer the same size as the common .46 I.C. trainers seen at most club fields, but this one is electric!

SEAGULL have done it again. Just like its younger brother the INNOVATOR, this 61.4 ins version carries the same unique features that have help changed the mould for Electric Sport Trainer Aircraft. The unique 2-piece modular fuselage and wings enable even this larger model to pack away into the smallest of areas for storage or transport.
It also uses the same direct tail control linkage system as the INNOVATOR to allow a smooth, crisp and accurate feel when flying.
The E-PIONEER is well suited for use on club grass strips and tarmac runways alike and with its direct linkage steerable nose wheel, the ground handling is excellent.
With its low wing loading and great flying performance we are sure the E-PIONEER will be a club and pilot favourite by all who get their hands on the controls.

Wing Span
Wing Area
Approx flying weight
61.4ins. (156.0cm)
4.0- 4.8lbs (1.8-2.2kg)
Servos Required
Suits Battery
Motor Required
5 x Mini servos
3200mAh Lipo 3 cell
E-Max BL2820-07 or similar

Thinking of choosing the E-Pioneer as your first R/C Model?
Then congratulations, you have made a great choice! All the trainers in the Airtek range have been carefully chosen to give the newcomer the best chance of success. We highly recommend that you enlist the help of an experienced modeller to check over your aircraft before it's first flight and teach you to fly. Trying to 'go it alone' will almost certainly result in disappointment and can be potentially dangerous. Wherever possible join a club (and take out third party insurance) where there will be experienced modellers at hand to help you through the early stages. For further information please visit the site of the national body for model flying, the BMFA here.
Model flying is a challenging and absorbing pastime, and many will find they become 'hooked' for life. Take care during the early stages and you will be rewarded with a great hobby - the sky really is the limit!
pdf To download a PDF of the instruction manual please click here
pdf To download a PDF the RCM&E Review please click here
Due to the size of kits these are all sent by carrier (requires signature). If you require your order to be sent to another address (e.g. work) please complete the delivery address details on checkout.