browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
ZTW UBEC 6A
pp

 

 

 

£

Quantity: 

A UBEC is needed if your Electronic Speed Controller (ESC) does not have a built in Battery Elimination Circuit (BEC). Theres also a requirement to fit a UBEC where the ESCs BEC is inadequate to power the number and / or size of servos being used. The ZTW UBEC range satisfies this requirement by supporting continuous simultaneous servo operations, thus eliminating the possibility of overloading your speed controllers BEC during periods of high peak demand (as might be experienced during extreme aerobatics).

    bullet Switch mode

    bullet Easy to set up and install.

    bullet Battery polarity reversal protection.

    bullet Electromagnetic interference reduction ensures optimum receiver performance.

    bullet LED status indicator.

 

Specifications

Output: Adjustable 5V / 5.5V / 6V at 12A
Input voltage: 6 - 25V
Output current: 6A continuous / 12A burst
Size (mm): 45 x 23 x 10
Weight (g): 18



Unit is supplied with wires bare ended for you to fit your own connectors

Home I Terms & Privacy Policy I Contact