Please Note: This item can be dispatched to UK Mainland addresses only. F4U Corsair PNP with Retracts (1100mm))

browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints

 

F4U Corsair PNP with Retracts (1100mm)



£
 
Quantity: 

 

If there’s one thing we guarantee you’ll do when you get your hands on the new Arrows Hobby Vought Corsair, it’s fly, and fly lots. Authentic, docile and eminently practical, the new 1100mm F4U not only looks the part, its confidence-inspiring flying characteristics and minimal preparation time will have you reaching for it time and time again.

Presented in the colour scheme of the F4U flown by Vance ‘Bud’ Yount while aboard USS Badoeng Strait during the Korean War this one really is easy on the eye with an abundance of scale detail. Clock the crisply detailed dummy Pratt & Whitney radial, the four-blade Hamilton Standard propeller, slick airbrake-equipped twist ‘n’ turn retracts, scale pilot figure, working landing and navigation lights, flaps, drop tanks, arrestor hook, detailed tail wheel and panel lines, to mention but a few.

Designed for a standard 3S 2200mAh LiPo and basic 6-channel R/C the F4U’s 850KV brushless motor and 40A ESC combo offers a hugely satisfying vertical performance that’ll have you grinning from ear to ear as you scribe large warbird loops over the patch. Go on, treat yourself.


What’s in the box

  • 1x Factory assembled and painted fuselage with decals applied
  • 1x Factory assembled and painted 1-piece wing with decals applied
  • 1x Factory assembled and painted tail set with decals applied
  • 1x Pre-installed 3536 850KV motor
  • 1x Pre-installed 40A ESC with XT60 connector
  • 1x Set of pre-installed twist and turn electric retracts
  • 1x Scale 4-blade propeller
  • 1x Elevator spar
  • 1x Screw and pushrod set
  • 1x Instruction manual
  • 7x Pre-installed high quality servos

 

Features

  • 3536 850KV brushless motor and 40A ESC
  • High power-to-weight ratio
  • Suits standard 3S 11.1V 2200mAh 25C LiPo
  • Oversized battery compartment to suit a multitude of battery sizes and capacities
  • Seven pre-installed high quality servos
  • Flap-equipped
  • Authentic twist and turn retracts
  • Highly durable EPO airframe
  • Easy assembly
  • Water-based paint
  • Realistic 4-blade propeller
  • Removable LiPo battery tray for quick changes
  • Superb scale detailing
  • Takes standard 6-channel radio
  •  

    Specification

    Wingspan: 1100mm (43.3in)

    Length: 880mm (34.6in)

    Flying Weight: Around 1260g

    CG (Center of Gravity): 60mm from leading edge

    Power System: 3536-850kV Brushless Outrunner

    Electronic Speed Control: 40A

    Propeller: 10.5 x 8

    Servos: 9 gram servo x 6

    Landing Gear: Electronic rotating retractable main gear

    Required Batter: 3S 2200mAh LiPo

    Required Radio: 6 Channel transmitter and receiver

    Ailerons: Yes

    Elevator: Yes

    Rudder: Yes

    Flaps: Yes

    Lights: Yes

    Hinge Type: Foam

    Material: EPO Foam

    Skill Level: Intermediate

    Build Time: 1-2 Hours

     

     

    Please Note: This item can be dispatched to UK Mainland addresses only.

    Home I Terms & Privacy Policy I Contact