browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints

 

Arrows Hobby T-28 Trojan PNP with Retracts (1100mm)

 



£
 
Quantity: 
 

 

 

The North American T-28 Trojan, a piston powered two seater trainer aircraft, was the last piston powered trainer to enter service with the United States Air Force and Navy. Designed in the 1950's, this aircraft played a key role in helping pilots transition from basic trainers to jet aircraft. The Arrows Hobby T-28 is one of the easiest flying aircraft on the market today. A beginner with basic flight experience could easily fly the T-28 with ease without the assistance of a gyro system. Featuring a realistic three bladed propeller, rivets, panel lines, landing gear doors and functional flaps, the T-28 looks as real as its full sized counterpart. A powerful 40A ESC and 3536 KV850 power system provides more than adequate thrust whenever necessary. The Arrows Hobby T-28 is a perfect aircraft for pilots transitioning from high winged aircraft and those who are looking for a scale aircraft that is easy to fly.



What’s in the box

  • 1x Factory assembled and painted fuselage.
  • 1x Factory assembled and painted 1-piece wing
  • 1x Factory assembled and painted tail set
  • 1x Pre-installed 3536 850kV motor
  • 1x Pre-installed 40A esc with XT60 connector
  • 3x Pre-installed electric retracts
  • 1x Scale 3-blade propeller and spinner set
  • 1x Elevator spar
  • 1x Screw and push rod set
  • 1x Instruction manual

 

 

Features

  • Power system- 3536 850kV Motor, 40A ESC
  • High power-to-weight ratio
  • Recommended battery 11.1V 2200mAh 25C
  • Oversized battery compartment for a multitude of battery sizes and capacities
  • 7x Pre-installed high quality servos
  • Highly detailed realistic and functional flaps and landing gear
  • Removable auxiliary fuel tank, bombs and rocket pods
  • Highly durable airframe
  • Easy assembly
  • Water-based paint

 

 

Specification

Wing Span 1,100mm 43.31in
Length 915mm 36.02in
Wing Area 20.00dm2 310in2

 

 

 

  • Needed to Complete
  • 6 channel radio and receiver
  • Recommended 11.1V 2200mAh 25C LiPo
  • Charger

 


Home I Terms & Privacy Policy I Contact