browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Dopes, Sealers, Thinners etc
dope

JP Clear Shrinking Dope 250ml
DTS001
JP clear shrinking dope tightens model aircraft fabrics to provide a waterproof lustrous (or satin finish) for aircraft & marine models.
Thin down with cellulose thinners as desired.

The classic dope used by generations of modellers the world over.

 

£
Quantity
dope

JP Clear Shrinking Dope 60ml
DTS002
JP clear shrinking dope tightens model aircraft fabrics to provide a waterproof lustrous (or satin finish) for aircraft & marine models.
Thin down with cellulose thinners as desired.

The classic dope used by generations of modellers the world over.

 

£
Quantity
dope

JP Sanding Sealer 250ml
DTS003
JP Sanding Sealer has a dense fine suspension which when sanded back provides a super smooth, easy to finish surface on all common modelling woods such as balsa and plywood.
surfaces can then be finished with a doped covering or simply painted.

£
Quantity
dope

JP Sanding Sealer 60ml
DTS004
JP Sanding Sealer has a dense fine suspension which when sanded back provides a super smooth, easy to finish surface on all common modelling woods such as balsa and plywood.
surfaces can then be finished with a doped covering or simply painted.

£
Quantity
dope

JP Cellulose Thinners 125ml
DTS005
Cellulose thinners for thinning Clear Dope, Sanding Sealer and cellulose based paints.

Also makes a great cleaner for plastic film coverings (as with all cellulose products test on a scrap piece first, and remember it eats foam at an alarming rate!

A 'must have' for every modellers workshop.

£
Quantity
dope

JP Satin Fuel Proofer 60ml
DTS006
JP Satin Fuel Proofer is an effective way to seal all open and painted areas against the ingress of fuel and oil on IC models.

Dries to an attractive satin sheen.

The handy size of 60ml makes it ideal for proofing your latest ARTF.

An enamel based product, thin and wash brushes with enamel thinners or turpentine.

£
Quantity
dope

JP Gloss Fuel Proofer 60ml
DTS007
JP Gloss Fuel Proofer is an effective way to seal all open and painted areas against the ingress of fuel and oil on IC models.

Dries to an attractive high gloss finish.

The handy size of 60ml makes it ideal for profing your latest ARTF.

An enamel based product, thin and wash brushes with enamel thinners or turpentine.

£
Quantity
switch

MD Balsa Bond 50ml
MDP5524828
Use this excellent preparation to improve the adhesion of most iron-on covering films and fabrics to difficult surfaces e.g. ply. Safe to use on plastic foam.

A PVA based mix, once allowed to dry the heat from the covering iron activates balsaloc which fuses with the adhesive on the film to form an extremely secure covering job.

 

£
Quantity

Home I Terms & Privacy Policy I Contact