tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators wat I.C. Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Henge 8A UBEC selectable output up to 7.4v






At last - an affordable UBEC that can take advantage of and unleash the potential of those high voltage servos. With an adjustable output of 5.0v, 6.0v and 7.4v..

A UBEC is needed if your Electronic Speed Controller (ESC) does not have a built in Battery Elimination Circuit (BEC). Theres also a requirement to fit a UBEC where the ESCs BEC is inadequate to power the number and / or size of servos being used


    bullet Output: 5v/8a, 6v/8a or 7.4v/8a (can be switched via jumper caps)

    bullet Maximum output Current: 12A (duration not exceeding 15 seconds)

  • bullet Input voltage: 7-25.5v (2-6 series Lithium battery or 6-16 ni-mh/ni-CD battery pack)
  • bullet Ripple: Less than 35mvp-p (@8a/12v)
  • bullet Dimensions: 45mm x 22mm x 7.5mm
  • bullet Weight 16g

Unit is supplied with wires bare ended for you to fit your own connectors

Home I Terms & Privacy Policy I Contact