browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags starter Multicopters prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
ZTW Mantis Series 2-3S 6A Electric Speed Controller

 
£
 
 
Quantity: 

The ZTW 'Mantis' Series ESC's have a tremendous feature set and outstanding build quality which represent superb value for money for the discerning modeller. Renowned for their legendary bullet proof reliability these are true' fit and forget' units.

ZTW are one of the most respected ESC and model electronic companies in the world and are the manufacturers of many popular and much higher priced brands.

If you want something with more than basic features that you can fine tune to your own requirements, built from quality components which when handled correctly will give you years of service and pleasure then look no further than a 'Mantis' ESC!

These ESC's are suitable for both fixed wing and helicopters, and can be programmed from the transmitter or optional Mantis programming card available at the bottom this page.


gifOutput gif6A (8A burst)
gifInput Voltage gif2 to 3 Li-Po, or 5 to 10 Ni-MH/Ni-Cd
gifBEC (Battery Elimination Circuit) gif5V/1A, linear
gifSize
gif14mm x 21mm x 7mm
gifWeight gif6g


Features

bullet Brake Setting 4 types: OFF, SOFT, MIDDLE and Hard.
bullet Battery Type Selection: LiPo, NiMh or NiCad
bullet Low Voltage Cutoff Threshold configurable for all battery types - for LiPO (Low) 2.8v, (Medium) 3.0v, (High) 3.2v
bullet Timing Setups: Automatic (7-30º) - ESC will automatically detect the best motor timing, Low (7-22º) setting for most 2 pole motors, High (22-30º) Setting for most 6 or more pole motors.
bullet Governor Mode (Helicopters only) - please read the instruction manual for a detailed description of this feature
bullet Motor rotation - motor can be programmed for forward or reverse rotation - a great timesaver, no more swapping wires!
bullet Start up strength: 3 types, low, medium and high
bullet Low Voltage Cutoff Types: 1) Reduce power 2) Immediately cut power when the voltage reaches its lowest preset power
bullet Super smooth and accurate throttle linearity
bullet Safety thermal overload protection
bullet Easy restoration of factory settings.
As supplied the default settings on the Mantis ESC are:
Brake Type: Brake Off
Battery Type: LiPo with Automatic Cell detective
Cut Off Voltage Threshold: 3.0V/60%
Motor Timing: Auto
SBEC Voltage Output: 5.0V
Governor Mode: RPM OFF
Motor Rotation: Forward
Start Up Strength: 30%
Low Voltage Cut Off Type: Reduce Power

ESC battery & motor wires are supplied bare ended for you to fit your own connectors.

pdf To download a PDF of the instruction book please click here

switch

Mantis Series Programming Card
MPC1
If you don't like programming from the transmitter then this easy to use programming card is the ideal partner for your ZTW Mantis series ESC. With this card setting features is a breeze, you will find yourself experimenting with different settings much more and changes at the field are so easy.

£
Quantity


Home I Terms & Privacy Policy I Contact