browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Mistral LED LiPo-NiMH 5A Charger
esc  
£
 
 
Quantity: 

The Mistral offers the perfect combination of user-friendly simplicity and intelligent programming. Sporting both AC and DC power options, an intuitive user interface and clear LED status lights, it is ideal for use at home, field, trackside, or lakeside.

 

Safe Start
Safe Start Technology helps ensure that a proper charge mode and a safe charge are used for each charge cycle and battery. The charger will not allow charging of LiPo batteries without utilizing the Safe Peak Balancing, nor will it allow you to accidentally charge a NiMH battery in LiPo mode. To keep your batteries from being charged incorrectly, the charger automatically resets the charge current to 0.5A for every charge cycle, ensuring the user selects the proper setting.

 

 

Safe Peak
Safe Peak technology optimizes the charging modes for each battery. NiCd and NiMH packs are charged to their maximum performance voltage by fully exploiting the delta-peak for each battery, thus helping to preserve longevity. LiPo batteries are balance charged to within 0.05V per cell, helping to prevent the catastrophic failures sometimes seen with other technology.


Features

LiPo, LiIon, and NiMH 50W charger
Use AC (110-240V) or DC (11-18V) power source
1-15 cell NiMH, 2-6 cells
LiPo 0.1 - 5A charge rate
Compact size (145x78x47mm) at 255g
Includes 4 different charger leads
Well ventilated with built-in fan.


Charge leads supplied are as follows:
1x 4mm bullets to HCT-male
1x HCT-female to Tamiya-male
1x HCT-female to XT60-male
1x HCT-male to Futaba-female



Download the manual!

Click the image on the left to download the full manual for the Mistral Charger

 

Home I Terms & Privacy Policy I Contact