tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Multiplex Safety Switch Lipo TwinBatt









Technically based on the SAFETY-SWITCH LiPo, the SAFETY-SWITCH LiPo TwinBatt offers the additional safety of an integral battery backer for use with two receiver batteries. If one battery should fail, the second pack assumes the role of power supply for the receiving system. The system is of duplicated construction, i.e. for maximum security each of the two power supply paths contains its own electronic switch, its own separate voltage regulator and a separate voltage monitor for each battery. This makes it easy for the user to identify a faulty receiver battery, or a pack approaching the end of its useful life, and replace it in good time.
The SAFETY-SWITCH LiPo TwinBatt is intended for use in all types of model aircraft of medium size, e.g.*:
bullet Power models up to about 2.2 m wingspan / 5 - 8 kg all-up weight, with 5 - 6 servos
bullet Gliders up to about 5 m wingspan, with 8 - 10 servos
bullet Model helicopters up to around .60 - .90 / 8 - 10S clas



Input voltage: max. 8.4 V (2S LiPo, 5 NiXX cells),
2 batteries: via integral battery backer
Output voltage: 5.5 V stabilised
Max. continuous current (with 2S-Lipo / 5 NiXX cells): 2 / 5 A
Max. continuous dissipated regulator power: 5 W
Battery connecting lead: 2 x 0.34 mm² with M6 connector system
Receiver connecting lead: 2 x 0.34 mm², UNI system
Weight: approx. 45 g
Dimensions (L x W x H): approx. 51 x 20 x 26 mm*


Want to know more - Download the manual!

Click the image on the left to download the full manual for the Multiplex GPS Unit





Home I Terms & Privacy Policy I Contact