browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Seagull Hawker Hurricane 33cc
£
 
Quantity: 

 

Where model meets reality - recreating the spirit of Hawkers most famous fighter, Seagulls 82 span ARTF is a feast for the eyes.

Two Allied fighters took on the Luftwaffe over the fields and towns of southern England back in the summer of 1940, one accounted for 60% of the RAF’s air victories, the other was the Spitfire. Of course, both were exemplary machines in their own way and whilst the Hurricane couldn’t match the speed of it’s BF109 adversary, it could out turn the German fighter and offered some advantage in that bullets would pass through its outdated fabric, wood and steel-tube structure without exploding. Pilots who converted from the earlier Hawker Hart (biplane) loved the Hurricane for it had all the qualities of its stable and secure predecessor, yet enhanced by livelier controls, added precision and enhanced performance.

Matching the distinctive humpback profile of the Hurricane whilst beautifully recreating the metal skin wing and wood / fabric rear fuselage detail, Seagull’s 82” span model of AE977 is not something to take for granted. Built from CNC-cut balsa and ply, wrapped in authentic matt Oracover and embellished with a scale detail, not to mention landing lights, a sprung tail wheel and inset trailing edge flaps, it’s a model that beautifully recreates the formidable full-size fighter. Fit a 33cc petrol engine, hook up the supplied mechanical retracts and she’ll fly like it too.


Features

bullet Lightweight, high quality balsa and plywood construction.
bullet Authentic scale colour scheme.
bullet Covered in genuine matt finish Oracover film.
bullet Factory painted fibreglass engine cowl.
bullet Detailed cockpit with lightweight painted pilot.
bullet Removable cockpit hatch for easy radio and fuel tank access.
bullet Superb flying characteristics.
bullet Plug-in outer wing panels simplify transportation and field assembly.
bullet Full hardware pack included for electric conversion.
bullet Numerous scale details.
bullet Authentic, inset, trailing edge flaps.
bullet Crystal clear screw-on canopy moulding.
bullet Mechanical retracts with sprung oleo-style legs.

 

What's in the box

1 x Factory assembled and covered fuselage.
1 x Factory assembled and covered 3-piece wing set.
1 x Factory assembled and covered tail set.
1 x Clear canopy moulding.
1 x Pilot figure.
1 x Factory painted glass fibre cowl.
1 x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
1 x Sprung / steerable tail wheel unit.
1 x Mechanical retract set with sprung (oleo style) legs.
1 x Comprehensive instruction manual.
1 x LED landing light set.

 

Specification

Wingspan (mm): 2083
Length (mm): 1486
Total surface area (sq. in): 1060
Weight (lb): 14.3

 

Needed to complete

1 x 33cc petrol engine, four-stroke glow, or electric equivalent.
1 x 7-channel (minimum) computer transmitter and receiver combo.
10 x Standard-size, digital, high torque, metal gear servos (Hitec HS-5645MG).
1 x Propeller to suit chosen engine.

 

Please Note: Seagull kits can be sent to UK mainland addresses only

Home I Terms & Privacy Policy I Contact