browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
BF 109E Messerchmitt 20cc
£
 
Quantity: 

 

An authentic matt finish Oracover scheme and an abundance of scale detail make Seagulls 64 span Bf 109 something of a must-have for warbird fans.

Seagull’s 64” span Messerschmitt is, not to put too fine a point on it, another winner that’s crying out for that 1.20 four-stroke (or the 20cc petrol) you’ve got sitting on the shelf in your workshop. Open the box, add the engine, throw in eight Hitec servos, a bit of glue, sprinkle with TLC, then shake vigorously for three minutes and your warbird will be born. Okay, only kidding, please don’t do that. Instead, spend a week or two of relaxed evenings piecing together the exquisite airframe components, attaching horns, hinges and linkages, fettling the engine fit and mounting those servos. At the end of it we guarantee you’ll have assembled a model that looks every bit the formidable Luftwaffe fighter and makes a real impression at the flying field. And that’s before it’s flown. Get it airborne and this evocative 1/6-scale aeroplane will give you a real flavour of the full-size and a buzz that’ll make you want to refuel and fly it again and again.


Features

bullet Lightweight, high quality balsa and plywood construction.
bullet Authentic scale colour scheme.
bullet Covered in genuine matt Oracover film.
bullet Factory painted glass fibre engine cowl.
bullet Detailed cockpit with lightweight painted pilot.
bullet Removable forward hatch for easy radio and flight battery access.
bullet Two-piece wing panels aid storage and simplify transportation.
bullet Full hardware pack included for either glow or electric power.
bullet Scale details including guns, tail struts, radiator blisters, undercarriage fairings and more.
bullet Crystal clear screw-on canopy moulding.
bullet Mechanical retracts.

 

What's in the box

1 x Factory assembled and covered fuselage.
1 x Factory assembled and covered 2-piece wing set.
1 x Factory assembled and covered tail set.
1 x Clear canopy moulding.
1 x Pilot figure.
1 x Factory painted glass fibre cowl.
1 x Mechanical retract set.
1 x Full hardware pack (screws, horns, pushrods, fuel tank etc.).
1 x Sprung / steerable tail wheel unit.
1 x Comprehensive instruction manual.
1 x Electric power conversion hardware set.

 

Specification

Wingspan (mm): 1630
Length (mm): 1560
Wing area (sq. in): 766
Weight (lb): 11.0

 

Needed to complete

1 x 20cc petrol engine, 1.20cu. in. four-stroke glow, or electric equivalent.
1 x 7-channel (minimum) computer transmitter and receiver combo.
8 x Standard-size servos.
1 x Propeller to suit chosen engine.

Please Note: Seagull kits can be sent to UK mainland addresses only

Home I Terms & Privacy Policy I Contact