browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Stearman Red Baron Pizza Squadron 20cc
£
 
Quantity: 

 

Spanning an impressive 1.8m at 1/5-scale Seagulls Stearman is a model that will definitely make an impression.

In terms of recognisable aircraft Boeing’s Stearman is up there with the Tiger Moth, the Piper Cub and the Cessna. It’s an aviation classic yet ARTF scale models are remarkably few in number. All, then, will welcome Seagull’s impressive 1/5-scale 71” span PT-17 Super Stearman decked out in the eye-catching colours of the Red Baron Squadron aerobatic team. Sporting all the twin wing struttery, flying wires and radial engine finery of the full-size, this is a model that, set against an azure sky, will fair knock yer socks off. What better introduction to scale model aeroplane ownership could you possibly want? With superb flying characteristics and no retracts to manage it certainly ticks a few boxes. What’s more, with Seagull’s convenient wing storage system - top and bottom panels assembled and supported (off model) with transport frames - rigging it at the field takes no more than 10 minutes. Now that, as biplane owners will attest, is the difference between a regular flyer and a hangar queen. All it needs is a 120 four-stroke (20cc petrol), six Hitec servos, a good 5-channel (minimum) radio and a bit of tender loving ARTF assembly... What are you waiting for?


Features

bullet Lightweight, high quality balsa and plywood construction.
bullet Authentic scale colour scheme.
bullet Covered in genuine Oracover film.
bullet Factory painted glass fibre engine cowl.
bullet Sunken cockpits with lightweight painted pilots.
bullet Removable cockpit hatch for easy radio and flight battery access.
bullet Pre-rigged top and bottom wing panels with storage frames simplify field assembly.
bullet Full hardware pack included for either glow or electric power.
bullet Scale details include a dummy radial engine, flying / landing wires, sprung tail wheel, and more.
bullet Undercarriage leg fairings.

 

What's in the box

1 x Factory assembled and covered fuselage.
1 x Factory assembled and covered 4-piece wing set.
1 x Factory assembled and covered tail set.
2 x Clear windscreen mouldings.
2 x Pilot figures.
1 x Factory painted glass fibre cowl.
1 x Full hardware pack (screws, horns, pushrods, fuel tank etc.).
1 x Sprung / steerable tail wheel unit.
1 x Comprehensive instruction manual.

 

Specification

Wingspan (mm): 1816
Length (mm): 1360
Wing area (sq. in): 1438
Weight (lb): 13.9

 

Needed to complete

1 x 20cc petrol engine, 1.20cu. in. four-stroke glow, or electric equivalent.
1 x 5-channel (minimum) computer transmitter and receiver combo.
6 x Standard-size servos.
1 x Propeller to suit chosen engine

Please Note: Seagull kits can be sent to UK mainland addresses only

Home I Terms & Privacy Policy I Contact