browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints

 

Nieuport 28 1/5 Scale (20cc) 1.72m (68in)
£
 
Quantity: 

 

Lightweight and manoeuvrable, The Nieuport 28 first flew in June 1917. It was the first fighter from the company to employ a standard two-spar wing. The streamlined fuselage was too slim for twin Vickers guns, so one has to be mounted to the fuselage side. After WW1, some went to the USA with a few entering races, albeit with shortened wings!

Seagull's model is big and beautiful with a laser-cut balsa/ply structure, expertly covered in genuine Oracover. Add some nice sport scale touches and you've a very practical model for all seasons.


Features

  • Large removable top hatch provides convenient access
  • Plug-in wings (four-piece) for easy transportation
  • Designed for glow, petrol/gas or electric power
  • Pull-pull rudder system
  • Skill level - intermediate/advanced
  • Wingspan - 68in (172.7cm)
  • Length - 55in (139.8cm)
  • Wing area - 1155.7 sq.in. (74.6dm²)
  • Weight - 12.8 - 13.2lbs (5.8 - 6.0kg)
  • Suggested power - 20cc - 26cc glow or petrol engine, or electric equivalent
  • Suggested electric power - 110-size outrunner, 8-9S LiPo battery, 85A ESC

  • What's in the Box

  • A beautiful laser-cut airframe, factory built and covered in genuine Oracover
  • Detailled cockpit with hand-painted pilot
  • Aluminium-reinforced landing gear
  • Scale-effect wheels and decals
  • Full hardware kit including engine mount and fuel tank
  • Wing transport frames
  • Full electric conversion kit with adjustable motor stand-off
  • Slide-in LiPo battery tray for easy pre-flight set-up
  • Scale Vickers guns

  • To download a PDF of the instruction book please click here

     

    Please Note: Seagull kits can be sent to UK mainland addresses only

    Home I Terms & Privacy Policy I Contact