browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Steen Skybolt N250SB
£
 
Quantity: 

 

The Steen Skybolt is an American homebuilt aerobatic biplane. Originally designed by Lamar Steen as an engineering project, the prototype first flew in October 1970. A Skybolt won the Reserve Grand Champion Custom Built for 1979 at the Experimental Aircraft Association airshow in Oshkosh Wisconsin.

Presented in this eye catching colour scheme this 118” span high quality balsa / ply ARTF comes factory covered in genuine gloss finish Oracover film and features a detailed cockpit, two piece plug-in wings with wing transport frames (to simplify transport and assembly) and, crucially, all the necessary hardware for either glow or electric power.


Features

bullet Lightweight, high quality balsa and plywood construction.
bullet Eye catching scale colour scheme.
bullet Covered in genuine gloss finish Oracover film.
bullet Factory painted fibreglass engine cowl and wheel spats.
bullet Detailed cockpit with lightweight painted pilot figure.
bullet Superb flying characteristics.
bullet Two-piece, plug-in wings simplify transportation and assembly.
bullet Full hardware pack included for either glow or electric power, with adjustable electric motor mount.
bullet Wing transport frames included.

What's in the box

1 x Factory assembled and covered fuselage.
1 x Factory assembled and covered wing set.
1 x Factory assembled and covered tail set.
1 x Clear canopy moulding.
1 x Pilot figure.
1 x Factory painted glass fibre cowl.
1 x Wing strut set.
1 x Wheel spat set.
1 x Comprehensive hardware pack (screws, horns, pushrods, fuel tank etc.).
1 x steerable tail wheel unit.
1 x Wing transport frames
1 x Durable aluminium undercarriage unit.
1 x Instruction manual.

 

Specification

Wingspan (mm): 1550
Length (mm): 1790
Wing area (sq. in): 1023
All-up weight (lb): 9.3

 

Needed to complete

1 x 15cc two-stroke or four-stroke
1 x 6-ch (minimum) computer transmitter and receiver combo.
6 x Servos
1 x propeller to suit chosen engine.



pdfTo download a PDF of the instruction sheet please click here

 

Please Note: Seagull kits can be sent to UK mainland addresses only

Home I Terms & Privacy Policy I Contact