browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc wat UBECS & Regulators rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Screws etc spinner Scale Accessories balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints
Van's RV-8 Diamond Di 20cc
£
 
Quantity: 

 

Stylish, aerobatic, pretty, and with sleek racy lines, there's little not to like about the RV-8. Truth is the overall proportions, the parallel chord wing, the sturdy looking fixed undercarriage and the fighter-like bubble canopy combine to make this a gorgeous flyer and a modeller's dream. Seagull certainly knows a good aeroplane when it sees one and this one is guaranteed to win friends, particularly with such a useful wingspan; 70" is a perfect, practical size for everyday use yet still large enough to really make an impression and display presence in the air. Absolutely ideal for a 91 cu. in. four-stroke the RV-8 uses 8 standard servos and a minimum of 6 channels, although a computer radio with 7 or 8 channels allows the twin aileron, flap and elevator servos to be mixed and reduces the use of Y-leads.

Built using Seagull's time-honoured CNC-cut interlocking balsa and ply construction and pre-covered in diligently applied Oracover heat-shrink film this is a model that builds quickly, looks fantastic, and suits anyone with previous low-wing aileron experience.


Features

bullet Lightweight, high quality CNC-cut balsa and ply construction.
bullet Factory covered with genuine Oracover film.
bullet High quality pre-painted glass fibre cowl.
bullet Cockpit detail with pre-painted pilot figure.
bullet Full hardware pack included for either glow or electric power.
bullet Includes i.c. and electric power conversion pack.
bullet Plug-in wing panels greatly assist storage and transport.
bullet Functional flaps enhance the flight performance and assist short landing and take-off.
bullet Large removable battery hatch for easy radio and flight battery access.
bullet Painted aluminium landing gear.

What's in the box

1 x Pre-finished fuselage assembly.
1 x Pre-finished wing set.
1 x Pre-finished fin and rudder.
1 x Pre-finished tailplane unit.
1 x Painted aluminium undercarriage unit.
1 x Clear canopy moulding.
1 x Aluminium tubular wing joiner.
1 x Pre-painted glass fibre cowl.
1 x Pre-painted pilot figure.
1 x Hardware set (horns, hinges, linkages, pushrods, fuel tank etc).
1 x Comprehensive instruction manual.

 

Specification

Wingspan (mm): 1800
Length (mm): 1473
Rec'd engine (i.c.): 20 – 22cc petrol / .91 cu. in. glow
Rec'd motor (electric): 1500 – 2000W
Wing area (sq. in): 992
Weight (lb): 11

 

Needed to complete

1 x 15 – 20cc petrol, .91cu. in. 4-stroke glow or 1500 – 2000W electric motor.
1 x 6-channel (minimum) computer radio with 8 servos.
1 x Propeller to suit chosen engine.
1 x Suitable flight battery and speed controller (electric version only).

pdfTo download a PDF of the instruction sheet please click here

 

Please Note: Seagull kits can be sent to UK mainland addresses only

Home I Terms & Privacy Policy I Contact