browse
tx R/C Systems Tx Rx etc tx ARTF and Kits wat Servosmot Electric Motors & Accessories esc Speed Controllers (ESC's) rx Receiver NiMH Battery Packs lipo Lipo Packs & Accessories charger Chargers & Charging Accs wat Watt Meters, Checkers, etc rx I.C. Glow and Petrol Engines plug I.C. Engine Accessories starter Field Equipment starter Cases and Bags prop Propellers & Accessories lipo Spinners wheel Wheels and Undercarriages spinner Connectors spinner Extension and Y Leads spinner Switches clevis Fittings (Horns, Hinge Etc) spinner Nuts, Bolts, Washers, Screws etc balsa Building Materials - Balsa etc cover Covering Materials spinner Simulators brush Brushes brush Pilot Figures band Ties, Tapes, Bands etc wire Heat Shrink & Wire toolTools glue Adhesives/Fillers etc. dope Dopes, Sealers, Proofers etc dope Paints

Seagull - The very finest engineered ARTF Models

The very finest engineered trainer, sport and scale models—precision-crafted, assembled and covered at the factory. Seagull Models have flyability built-in and the work built-out!
Seagull Models have specialized in designing and manufacturing Almost-Ready-To-Fly (ARF) R/C model aircraft since 1998. Today, Seagull models have become one of the largest and most experienced R/C model aircraft manufacturers in the world.

Factory-Built Models

Airframes and flying surfaces are all factory-built, covered and decorated. Just add your engine, your R/C, undertake the final assembly of components and you are ready to take to the skies! Take a look at the fastidious attention to detail, the laser-cut components, the pinned and glued hinges, the finished and installed servo trays and pushrods and so much more. Every aspect of a Seagull crafted model is meticulously implemented with the last word in customer satisfaction in mind.

The science of lasers

Seagull have built up a large suite of advanced laser-cutting machines guaranteed to supply the most precise of components used for ALL AIRCRAFT from trainers to sport and right through to big scale aircraft. At Seagull Models, laser-cutting is not reserved just for the larger, more expensive models in the range.

The science of CAD and materials

In fact, state-of-the-art CAD software and materials science combined with the most fastidious engineering techniques are right at the core of the Seagull approach. CAD software with laser-cutting allows Seagull engineers to produce components that improve the scale appearance and strength in ways that were not possible previously. The implementation of Materials Science can be clearly seen in Seagull’s use of custom 3-ply laminated balsa sheeting. This material is nearly as strong as plywood but is mainly balsa and it feels, looks and weighs like balsa! Indeed, so strong and light is it that many experienced modellers assume it is normal balsa sheet. It is, however, many times stronger than the traditional balsa sheet that is used in most other model aircraft.

Oracover—the science of Covering

Most people take for granted the amazing strength, the incredible puncture-resistance and the fantastic temperature-tolerant attributes of the amazing Wonder Materiel that is Oracover covering film. It is used to cover all Seagull models except trainers.

Oracover is widely regarded as the best covering money can buy - which is exactly why Seagull use it!


Fly as Glow or Electric

The latest Seagull models include an electric conversion kit for FREE allowing you to fit an electric motor of your choice instead of an IC motor! There is a comprehensive set of instructions in the manual on how to do this. Look for the EP logo below!

Comprehensive Fittings kits included

Comprehensive hardware packs containing wheels, tank, clevises, etc., are included with Seagull models as are detailed, photo-illustrated step-by-step instruction manuals.

Unlike other ARTF models all these are top quality so you won't be going back to the model shop for replacements!

 


xray

Seagull Classic Ugly Stick
5500167
There can't be many modellers that haven't heard of, or flown a 'stik' of some sort. Tough, with great flying characteristics this model will give many hours of flying pleasure. It's hard to beat a stik!

Suits - 60-91 2/4-stroke or small petrol.

£
xray

Seagull Jumper 25 Trainer
5500196
What a great medium sized factory-built trainer aircraft! More compact than the hugely popular Arising Star but with fabulous flying qualities and the same feature set:

Suits - 25-32 2-stroke

£
xray

Seagull Arising Star V2 40-46 Trainer
5500182
it would be rare to visit a flying site on a typical club day and not see at least one of these in use. The reason for this is simple - the Arising Star is one of the best, if not the best ARTF Trainers available.

Suits - 40-46 2-stroke. (52 4-Stroke)

£
xray

Seagull Boomerang V2 40-46 Trainer
5500183
The updated V2 of the iconic Seagull Boomerang. Fly it either glow or electric, trike or taildragger this classic aircraft is just outstanding value.

The best just got a whole lot better!

Suits - 40-46 2-stroke. (52 4-Stroke)

£
xray

Seagull Funky Cub
5500166
The FUNKY CUB 10cc-15cc was designed with the sports trainer flyer in mind. It is a high-wing aeroplane which is easy to fly and quick to assemble. A lot of flying fun is to be had with this type of model.

£
xray

Seagull Funfly 3D
5500104
Lightweight aerobatic Funfly model from Seagull appropriately called FUNFLY 3D!

Includes all mounting and hardware to support electric or IC motors.

Suits - 46-52 2-Stroke (70 4-stroke)

£
xray

Seagull Ultra Jet (Silver/Red)
5500106
If you have ever fancied a gas turbine model but have been put off by the cost then why not try one of these. Fast, smooth and crisp to fly this fantastic prop-jet will keep you on your toes!

Suits - 61-90 2-Stroke (61-90 4-stroke)

£
xray

Seagull Ultra Jet (red, white and black)
5500108
If you have ever fancied a gas turbine model but have been put off by the cost then why not try one of these. Fast, smooth and crisp to fly this fantastic prop-jet will keep you on your toes!

Suits - 61-90 2-Stroke (61-90 4-stroke)

£
xray

Seagull Sea Eagle F3A
5500134
Whether you are serious about F3A aerobatics or want the sweetest handling mid size model the Sea Eagle will definitely not disappoint. Superb!

 

Suits - 46 2-Stroke (60 4-stroke)

£
xray

Seagull Challenge Super Sporter
5500144
Mastered your trainer? Ready to move on to your first low wing model? Then you really need to take a look at this one. Classic layout, this one will soon have you flying aerobatics!

Suits - 46-52 2 Stroke (52-61 4-stroke)

£
xray

Seagull Maxi Lift 33cc
5500150
A huge model that can really work. Can be adapted to glider towing, toffee bombing, aerial photography and a myriad of other uses - or just enjoy the delights of flying a large model!

Suits - 33cc Engine

£
xray

Seagull Isport 10-15cc
5500152
Another low winger with the classic 'guaranteed to fly right' similar to the Super Sporter but this time a little larger. Suitable for .60 2 strokes or .90 4 strokes it is also ideal for the new generation small petrol engines in the 10-15cc range.

£
xray

Seagull Harrier 90 3D
5500161
A true classic 3D model coyly revealing it’s beautiful laser-cut balsa work, painstaking, surgical assembly and delectably finished in wonderfully strong transparent Oracover.

Suits - 61-108 2-stroke. (91-120 4-stroke)

£
xray

Seagull Dual Ace Twin (2 x 46)
5500175
Always wanted to fly a twin? Then this is the model for you! Seagull offer you the chance to fly a twin engine aircraft that will stand out from any other single engine aircraft at your flying field.

Suits - 2 x 46 2-stroke

£
xray

Seagull 40 low Wing Sport
5500196
The classic low wing sports layout favoured by modellers the world over, and a great first low winger and follow up model from your trainer.

 

Suits - 32-46 2-stroke. (52 4-Stroke)

£

Home I Terms & Privacy Policy I Contact